how to use usha hand sewing machine ?how to use usha hand sewing machine ?

Today I will tell you how to use Usha’s hand operated saving machine. You are going to know how to operate the hand and foot operated Usha Sarkar machine and how it is used. All the information related to Usha sewing machine is given here.

How to operate Usha sewing machine?

Usha sewing machine is very easy to operate. Usha sewing machine is operated by hand as well as by tree. Hand operated Usha sewing machine comes in different types and foot operated sewing machine comes in different types. There is not much difference between hand-operated and foot-operated sewing machines. The hand is used to operate a hand-operated sewing machine, while the foot is used to operate a foot-operated sewing machine.

How to fill thread in the bobbin of a sewing machine?

If you want to stitch with Usha sewing machine or want to do any sewing work, then you will have to first fill the thread in the bobbin. If the bobbin is not filled with thread then neither you can stitch nor you can do sewing work. It is very easy to fill thread in the bobbin. You can fill thread in the bobbin by following a very simple process.

To make thread in the bobbin, first of all you have to remove the slide plate and after that you have to remove the bobbin case. After removing the bobbin case, the bobbin has to be removed from the bobbin case. After that the thread has to pass through the bobbin winding tension bracket. After that the bobbin has to be put on the bobbin vinder spinder. After that press the Bobbin vendor latch to hold the bobbin. Loosen the Stop motion screw while holding the balance wheel with your left hand. After that start the machine running. When the bobbin is completely filled it will stop automatically. After that cut the thread and remove the filled bobbin. After that tighten the stop motion.

After that you have to keep the refilled bobbin in the bobbin case. After that, pull the thread in the watch bobbin case slot by pulling it in the clockwise direction. You have to leave 10 inches i.e. 4 centimeters of thread free outside the bobbin case slot. Pull the thread under the tension spring and under the delivery eye.

How to keep a filled bobbin case in the shuttle?

To place the bobbin case in the shuttle, first of all you have to open the shuttle and then keep the bobbin case straight in the shuttle. After inserting the bobbin case in the shuttle, ensure that the bobbin case is completely fixed in the shuttle or not. Release the bobbin case clutch, this will fix the bobbin case completely.

Threading the machine

Let us now know how to thread the machine? Balance: First of all you have to rotate the balance wheel and keep the thread take up lever at its highest position. After that the presser bar has to rise. Take the thread through the thread guide to the face plate and then pull it to the holding tension discs and then insert the thread inside the thread take up lever from back to front.

After that, take the thread from the top and insert it inside the face plate thread guide. After that pull the thread down and insert it into the needle bar thread guide. After that the thread has to be inserted into the eye of the needle from the left side. Now you have to hold the thread and rotate the balance wheel and let the needle go inside. You have to keep rotating the balance wheel until the C goes in and comes out again.

To pull out the bobbin thread you have to pull the needle thread. To adjust the upper thread you have to fix the thread tension. To reduce the tension in the thread, rotate the thread tension forward and if you want tension in the thread then you have to rotate the thread tension backward so that the thread becomes tight.

It is very important for the thread tension to be correct while sewing, otherwise you may see looseness in the thread while sewing or the thread may break again and again. The main reason for frequent breakage of the thread and the thread remaining loose is that the thread tension is not fixed. If the thread tension is not fixed then you may see both these problems in the machine.

Information about stitch regulator knob

The Stitch regulator knob decides what the length of your thread, i.e. your stitches, will be. The Stitch regulator knob is used to increase or decrease the stitch length. With the help of the stitch regulator knob, you can increase or decrease the stitch length. You can also sew in reverse by moving the stitch regulator knob to the highest point.

How to change the needle in a sewing machine?

Let us now know how to change the needle in a sewing machine. It is very easy to change the needle in a sewing machine. You have to take care of some small things and things. If you keep these things in mind then you can change the needle in the sewing machine very easily and there is no problem in your sewing machine.

To change the needle in a sewing machine, the needle clamp screw has to be loosened. When you loosen the needle clamp screw completely, then you have to lower the needle and take out the needle. In the sewing machine that comes at home, one head of the needle is round and the other end is flat.

How to clean Shuttle?

Let us now know how to clean the Shuttle. The correct way to clean the shuttle. First of all you have to take out the bobbin from the shuttle case. To take out the shuttle, the shuttle race clamp has to be rotated. After that clean the Shuttle with a soft cloth and replace the Shuttle. After that place the Shuttle inside the Shuttle case and then put the bobbin inside and after that close the Slide plate.

How to put oil in the machine?

To simplify the work and maintain the machine, you have to add oil to the machine from time to time. When we buy a sewing machine, an oil bottle comes along with it. This oil has to be poured into the parts of the machine, so that the machine works properly. To pour oil into the sewing machine, holes are made inside the machine. A little oil has to be poured into the holes from time to time. If you use the machine once a week then you have to lubricate the machine with oil once a month.

Preeti Lakhara

My name is Preeti and I have a lot of interest in sewing. I have been doing sewing work for the last 5 years. Therefore, I have experience in all types of work related to sewing. Through this blog I try to solve problems related to sewing machines. If you have any problem related to sewing then you can find the solution to your problem on our blog.

By Preeti Lakhara

My name is Preeti and I have a lot of interest in sewing. I have been doing sewing work for the last 5 years. Therefore, I have experience in all types of work related to sewing. Through this blog I try to solve problems related to sewing machines. If you have any problem related to sewing then you can find the solution to your problem on our blog.